General Information
Emergency Safety Showers and Eye Washes are Essential Safety Devices
- Accidents caused by fire, scalding and others often happen in numerous firms.
- There are also risks of eye injuries at places where great amount of dust can accumulate, for example, wood products production workshops.
- The danger also lurks at schools, in laboratories, large kitchens, ships and at other places.
- Experience shows that thousands of industrial accidents happen every year in spite of strict precautionary measures. These accidents cause the injured acute pain, disablement and may even lead to loss of lives.
- The consequences of such accidents could be consiuderably limited by treating with water immediately.
- Serious personal injury can be avoided through small costs. This is why every place where the danger lurks should install emergency safety showers or eye washes.
Installation and Operation of Emergency Safety Showers
- As a basic rule the emergency safety showers must be placed as close to the working places as possible. The flushing must start immediately after the accidents have occurred, and last at least 5 seconds. When installing the emergency safety showers, please remember that the showers must be easy to find and that the access must always be free.
- If a person works alone, it is wise to install a sound and/or light alarm too, which begins functioning as soon as the shower is operated.
Operation
- All emergency safety showers are constructed in a way that enssures easy operation.
- When activating the emergency shower, the flushing continues automatically.
- The injured person has help to keep eyes open by hand.
- On the eye washes, the nozzles are protected by rubber cups to keep the injured from hurting again.
- The nozzles also protect against dust and dirt by the caps, which are removed automatically by water.
Water Pressure and Temperature
- The emergency safety showers are connected to the cold water system which ensures clean and fresh water. The temperature should be around 8ºC to 20 ºC.
- The eye washes have the different pressure atomizing lip. It can be on the basic of locale hydraulic pressure to use the different pressure atomizing lip for the best effect.
Product Description
Wall-mounted Douhble Eye Wash for Laboratory
ME-H0759B
SS304 / Galvanization Iron Unit
Material: SS304 and galvanization iron
Eye wash bowl: stainless steel and PP bowl. Water bore is made of PP (ABS shield cap).
Finish: exquisite polished, high gloss epoxy powder coating, resistant to chemicals and UV
Sprayer head: water bore treated by special reducer
Pusher: operation is simply by push the pusher sign
Packaging & Shipping
Company Profile
Zhongshan Mayen Commerce and Trading Co., Ltd. is one of the highly reputed laboratory products suppliers. With years of experience with our factory in production and sales, we comply with the demand of industry development.
Nowadays, we are taking the lead in universities, institutes and industries like pharmaceuticals, medical, chemical, petrochemicals, electronic, metallurgical and mechanicals. And our products have been exported to North America, Europe, Asia, Middle East, etc.
Our extensive range of products covers the requirements of professional laboratories in most industries and in the educational sector. We can design a complete solution to accommodate your requirements and standards perfectly.
Our products include:
LABORATORY PRODUCTS
- Laboratory Worktops
- Epoxy Resin Worktops
- Phenolic Resin Worktops
- Compact Laminates
- Ceramic Worktops
- Laboratory Accessories and Fittings
- Epoxy Resin Sinks and Cupsinks
- PP Sinks and Cupsinks
- Water Taps
- Gas Valves
- Eye Washes
- Emergency Safety Showers
- Fume Extraction Arms
- Pegboards
- Laboratory Centrifugal Blower
- Laboratory Equipment
- Laboratory Furniture
- Laboratory Fume Hoods
- Biological Safety Cabinets
- Safety Storage Cabinets
- Laminar Flow Cabinet
- Other Safety Products
- Desktop Air Purifier
EDUCATIONAL FURNITURE
- Early Learning Series
- Classroom Series
- Library Series
- Training Series
- Stadium Series
- Cafeteria Series
- University Laboratory Series
EDUCATIONAL MODELS
1. Skeleton Series
2. Torso Series
3. Anatomical Series
4. Simulator Series
5. Acupuncture Series
6. Plant Series
"To provide customers with more professional products and perfect service " is our existing base. We will continuously improve our product design, production technology, customer service and try to be the inspirational leader in the field!
FAQ
Q1. Why choose us?
A1. We are the leading laboratory products supplier, OEM & ODM service are offered.
Q2. What's MAYEN main products?
A2. We supply epoxy resin worktops, epoxy resin sinks, phenolic worktops, water faucets, gas fittings, emergency showers, eye washes, pegboards, extraction arms and other accessories, fume hoods, equipment and lab furniture for laboratory.
Q3. How about the sample?
A3. We could send you the samples but the freight is collect.
Q4. How about the payment term?
A4. T/T & L/C (50% deposit, the balance before shipment).
Q5. How about the delivery time?
A5. Within 7-15 workdays after receiving deposit.
Q6. How about the validity of quotation?
A6. Usually 60 days as the shipping freight and exchange rate can be fluctuant.
Q7. What is the shipping port?
A7. FOB to Guangzhou or Shenzhen Port,China(also can ship according to customers' request).
Q8. How about the package?
A8. Wooden crating or carton.
Q9. How to inspect the goods?
A9. Products will checked by our QC staff first, then our proejct manager. Client can come and check by themselves or by the third party.
Audited Supplier 
){kind=link}
){kind=link}